Unit 3: Glaciers, GPS, and Sea Level Rise part of Measuring the Earth with GPS
Karen M. Kortz (Community College of Rhode Island) Jessica J. Smay (San Jose City College)
GPS data can measure bedrock elevation change in response to the changing mass of glaciers. In this module, students will learn how to read GPS data to interpret how the mass of glaciers in Alaska and Greenland is ...

Unit 3: Static GPS/GNSS Methods part of High Precision Positioning with Static and Kinematic GPS
Ben Crosby, Idaho State University
The application of Global Navigation Satellite Systems (GNSS) in the earth sciences has become commonplace. GNSS data can produce high-accuracy, high-resolution measurements in common reference frames. Static GNSS ...

Unit 2.2: Change Detection with Kinematic GPS/GNSS part of High Precision Positioning with Static and Kinematic GPS
Ben Crosby, Idaho State University
Though it may be difficult to perceive, landscapes are constantly changing form and position. High-precision GNSS is one of a handful of techniques capable of quantifying these changes and is a key component of ...

Unit 4: Anatomy of a tragic slide: Oso Landslide case study part of Surface Process Hazards
Becca Walker, Mt. San Antonio College
Landslides can have profound societal consequences, such as did the slide that occurred near Oso, Washington in 2014. Forty-three people were killed and entire rural neighborhood was destroyed. In this unit, ...

Unit 1: Slip-sliding away: case study landslides in Italy and Peru part of Surface Process Hazards
Sarah Hall, College of the Atlantic; Becca Walker, Mt. San Antonio College
How have mass-wasting events affected communities, and what lessons have we learned from these natural disasters that might help us mitigate future hazards? In this unit, students answer these questions by being ...

Unit 3: Understanding landslide factors part of Surface Process Hazards
Becca Walker, Mt. San Antonio College
How do slope characteristics and magnitude of forces dictate whether or not a slope will fail? Can environmental and built characteristics change the magnitude of these forces? In this unit, students qualitatively ...

Unit 5: Mitigating future disasters: developing a mass-wasting hazard map part of Surface Process Hazards
Becca Walker, Mt. San Antonio College
This unit serves as the summative assessment of the Surface Process Hazards module. In September 2013, the Boulder area of Colorado experienced an extreme rain event that led to mass wasting in many areas. This has ...

Unit 2: Reading the landscape part of Surface Process Hazards
Sarah Hall, College of the Atlantic; Becca Walker, Mt. San Antonio College
How do geologic, hydrologic, biologic, and built-landscape features manifest themselves on maps? In this unit, students will use topographic maps, hillshade maps, and aerial imagery to learn to recognize a variety ...

Unit 3: Monitoring groundwater storage with GPS vertical position part of Measuring Water Resources
Bruce Douglas, Indiana University-Bloomington; Eric Small, University of Colorado at Boulder
This unit shows how GPS records of surface elevation can be used to monitor groundwater changes. Students calculate secular trends in the GPS time series and then use the original and detrended records to identify ...

Unit 3: Geodetic survey of a fault scarp part of Analyzing High Resolution Topography with TLS and SfM
Bruce Douglas (Indiana University) Nicholas Pinter (University of California Davis) Nathan Niemi (University of Michigan) J. Ramon Arrowsmith (Arizona State University) Kate Shervais (UNAVCO) Chris Crosby (EarthScope)
In this unit, students will design a survey (TLS and/or SfM) of a fault scarp. After conducting the survey in the field, students will analyze the data to identify the number and magnitude of possible fault ...