CommentsSuggestions for Workshp Mechanics http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#discussion Hi all- This ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2851 Cathy Manduca 1224528360 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2851 Cathy -- I'm ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2855 Robert Kuhlman 1224530160 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2855 Hi Rob,<br /> <br ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2857
Sure, I can make links to whatever you need (I have that kind of power). But can you give me a little more direction on what you are needing links to?

One thing that can be hard to figure out is that the left-hand menu is two-tiered. Under the workshop section you'll find things that relate specifically to the workshop. If you click on 'Hurricanes Climate Connection' then the workshop menu items disappear and you get a new menu that applies to general references and resources for this topic.

Anyway, let me know what would be helpful and I'll try to arrange things accordingly.

thanks,
Karin]]>
Karin Kirk 1224535860 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2857
Hi, Karin! <br /> ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2864
Sorry to be such a pebble in the shoe; I may have overstated the situation in a bout of calorie deprivation earlier this afternoon... But here's a starter: Profile

I can't seem to get to my Profile page -- either the one I've submitted or the development one -- without going to the Technical Information page, scrolling down, and clicking on the link to 'setting up an account' (or words to that effect). The segment on the Tech Info page on 'creating a profile' doesn't have a means of directly linking to the profile itself. Nor does the link for Participants and Profiles enable me to get to my profile. I'll get used to it, but I'm a slow learner...

Rob ]]>
Robert Kuhlman 1224548040 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2864
Ah, I see. Thanks ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2865
OK, here are two changes that may help.

1. I added a link to the SERC login on the program page where it says to work on your profile page (Monday afternoon). At least that will save you a bit of searching to get to the login.

2. I added this to the tech page instructions for editing your profile page. It's a shortcut:

A quick way to edit your page is to go to the development version of the page. You can do this by changing the URL as follows:
*insert /dev after the edu in the URL*


Note that you only have permission to see the development version of your own page and you won't be able to see the development version of any other pages. Also, if you are not logged in you will be asked to do so along the way.

Once you are viewing the development version of your page, click the red 'edit' button in the upper right corner and you will go to the editing platform for the page.

I hope this helps! If not, please let me know. One of the nice things about our system is that it's quite flexible. So it's important for us to hear from actual users so we can tune things to work better.]]>
Karin Kirk 1224593880 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2865
I keep loosing the ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2872 Catherine Gautier 1224607860 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2872 I've also been ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2881 Lisa Doner 1224611820 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2881 Hi Lisa,<br /> I ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2882 I think one good approach is to just head for the program page each morning: http://serc.carleton.edu/NAGTWorkshops/hurricanes08/program.html

You'll find today's schedule there, and the links to watch and hear past sessions right along with the other information about each session. There's a link at the top of the program page to the technical information page which has the dial-in number and access code at the top as well as the yugma link and the instructions for getting to the profile page.

The navigation menu on the left side of each of these pages includes links to the discussion, program, and technical information pages. So once you've found one you should be able to easily move to the others.

Perhaps Karin can consider also including the yugma url and the dial number/code in the emails that are going out each morning.
]]>
Sean Fox 1224612600 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2882
Sean, <br /> I ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2892 I followed the activity link at the end of the workshop program (Tuesday)and spent around an hour filling in my general activity idea. I filled in the spam filter and pressed submit. Is there a delay in the posting of an activity submission or did I loose the text I typed (I hope not).

thanks,
Chad]]>
Chad Heinzel 1224624360 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2892
Chad,<br /> <br /> ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2894
Don't worry, it's not lost!

There is a delay while either Sean or I upload your text into a web page. That is done now and your page is linked from your profile page. All of the pages so far are also here:
http://serc.carleton.edu/NAGTWorkshops/hurricanes/activities.html

This page shows both the complete and the in-progress activities, for your viewing pleasure.]]>
Karin Kirk 1224627180 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2894
The Website Tour is ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2905
Rob]]>
Robert Kuhlman 1224675060 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2905
It was nested into ... http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2910 Karin Kirk 1224688140 http://serc.carleton.edu/NAGTWorkshops/hurricanes08/discuss/commentssuggestions_workshp_mechanics.html#post2910